J'utilise Stog pour
réaliser ce blog.
Stog est basé sur un moteur de patrons en Xml et
il comporte par défaut un certain nombre de règles, dont certaines permettent
d'incorporer du 
. Le code latex est
envoyé à latex pour obtenir un fichier .dvi,
lui-même envoyé à dvisvgm qui le transforme en SVG.
Un autre exemple:
![\centerline{\begin{tikzpicture}[scale=1.8]
\draw (0,0) -- (0,4) ;
\draw [>=stealth,->] (0,0) -- (0,1) ;
\draw (0,0) -- (3,0) ;
\draw [dotted, very thin, gray] (0,0) grid (3,4);
\draw (3,0) node[right]{$X_n$} ;
\draw (0,4) node[left]{$M_n$} ;
\draw (1,0) node[below]{0};
\draw (2,0) node[below]{1};\draw (1, 1) node {$\bullet$};
\draw [>=stealth, ->] (1, 1) -- (1, 2) node[midway,above,sloped]{$q_{0}(0)$};
\draw (1, 2) node {$\bullet$};
\draw [>=stealth, ->] (1, 2) -- (2, 1) node[midway,below,sloped]{$q_{00}(1)$};
\draw (2, 1) node {$\bullet$};
\draw [>=stealth, ->] (2, 1) -- (2, 2) node[midway,below,sloped]{$q_{100}(1)$};
\draw (2, 2) node {$\bullet$};
\draw [>=stealth, ->] (2, 2) -- (2, 3) node[midway,below,sloped]{$q_{1100}(1)$};
\draw (2, 3) node {$\bullet$};
\draw [draw=red, fill=red, ->, double,thick] (2, 3) -- (1, 1) node[midway,above,sloped]{{\color{red}$q_{11100}(0)$}};
\draw [draw=red, fill=red, ->, double,thick] (2, 3) -- (2, 4) node[midway,above,sloped]{{\color{red}$q_{11100}(1)$}};
\draw (2, 3) node {{\color{red}$\bullet$}};
\end{tikzpicture}}
\centerline{...100111}](https://www.oranadoz.net/_latex2.svg "\centerline{\begin{tikzpicture}[scale=1.8]
\draw (0,0) -- (0,4) ;
\draw [>=stealth,->] (0,0) -- (0,1) ;
\draw (0,0) -- (3,0) ;
\draw [dotted, very thin, gray] (0,0) grid (3,4);
\draw (3,0) node[right]{$X_n$} ;
\draw (0,4) node[left]{$M_n$} ;
\draw (1,0) node[below]{0};
\draw (2,0) node[below]{1};\draw (1, 1) node {$\bullet$};
\draw [>=stealth, ->] (1, 1) -- (1, 2) node[midway,above,sloped]{$q_{0}(0)$};
\draw (1, 2) node {$\bullet$};
\draw [>=stealth, ->] (1, 2) -- (2, 1) node[midway,below,sloped]{$q_{00}(1)$};
\draw (2, 1) node {$\bullet$};
\draw [>=stealth, ->] (2, 1) -- (2, 2) node[midway,below,sloped]{$q_{100}(1)$};
\draw (2, 2) node {$\bullet$};
\draw [>=stealth, ->] (2, 2) -- (2, 3) node[midway,below,sloped]{$q_{1100}(1)$};
\draw (2, 3) node {$\bullet$};
\draw [draw=red, fill=red, ->, double,thick] (2, 3) -- (1, 1) node[midway,above,sloped]{{\color{red}$q_{11100}(0)$}};
\draw [draw=red, fill=red, ->, double,thick] (2, 3) -- (2, 4) node[midway,above,sloped]{{\color{red}$q_{11100}(1)$}};
\draw (2, 3) node {{\color{red}$\bullet$}};
\end{tikzpicture}}
\centerline{...100111}")